 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ALUMINUM ELECTROLYTIC CAPACITORS UJ Chip Type, Higher Capacitance Range series Chip Type, higher capacitance in larger case sizes (12.5, 16, 18, 20) Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape and tray. Adapted to the RoHS directive (2002/95/EC). UH High Temperature UJ Bi-Polarized UN Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan - 55 ~ +105C (6.3 ~ 100V), - 40 ~ +105C (160 ~ 450V) 6.3~450V 3.3~6800F 20% at 120Hz, 20C Rated voltage (V) -- Rated voltage (V) tan (MAX) Rated voltage (V) 6.3 0.26 6.3 5 10 10 0.22 10 4 8 16 0.18 16 3 6 6.3 ~ 100 160~450 50 0.12 50 2 3 63 0.10 63 2 3 100 0.08 100 2 3 Performance Characteristics After 1 minutes' application of rated voltage, leakage current is not more than 0.03CV or 4 (A), whichever is greater. 25 0.16 25 2 4 35 0.14 35 2 3 I = 0.04CV+100 ( A) max.(1 minute's) 160 ~ 250 400 * 450 120Hz 0.15 0.20 20C 120Hz For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 160 ~ 250 3 6 400 * 450 6 10 Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z-25C / Z+20C Z-40C / Z+20C Endurance After 5000 hours' application of rated voltage at 105C, capacitors meet the characteristic requirements listed at right. Capacitance change tan Leakage current Within 20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storing the capacitors under no load at 105C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the specified value for endurance characteristics listed above. Black print on the case top. Chip Type Trade mark Voltage Lot No. Plastic platform A0.2 B0.2 Type numbering system (Example : 50V 330F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 U U J 1H 3 3 1 M NL 1 MS 330 F nichicon H0536 50V Package code B D0.5 B0.2 C0.2 E UJ Taping Tray Size code MS ZD Capacitance L0.5 A0.2 Series Pressure relief vent Configuration Capacitance Tolerance (20%) Rated Capacitance (330F) D 12.5 ~ 18 20 Code NL RL (mm) H0.1 BD A B C E 12.5 4.0 13.6 16.0 8.0 2.5 16. 4.5 17.1 19.5 10.5 3.75 18. 5.0 19.1 21.5 11.5 3.75 20. 5.0 21.1 23.5 13.5 3.75 The lead terminal structure : The same bent lead type (refer to p.60) that is currently used on 10mm diameter and smaller parts, is also available upon request. In this case of the bent lead type, Q Please ask for details. will be put at the 11th digit of type numbering system. Rated voltage (50V) Series name Type Dimensions (F) Cap. Code H V 221 331 471 102 222 332 472 682 V 6.3 0J 10 1A 16 1C 25 1E 12.5 x 13.5 12.5 x 16.0 18 x 16.5 18 x 21.5 320 400 700 1050 35 1V 12.5 x 13.5 12.5 x 16.0 16 x 16.5 18 x 16.5 20 x 21.5 280 360 490 750 1150 50 1H 12.5 x 16.0 16 x 16.5 18 x 16.5 18 x 21.5 320 440 550 820 220 330 470 1000 2200 3300 4700 6800 (F) Cap. 12.5 x 13.5 16 x 16.5 18 x 16.5 18 x 21.5 20 x 21.5 440 750 930 1100 1350 12.5 x 16.0 16 x 16.5 18 x 16.5 18 x 21.5 20 x 21.5 500 810 1000 1200 1450 12.5 x 13.5 16 x 16.5 18 x 16.5 18 x 21.5 360 630 930 1150 63 1J 100 2A 160 2C 200 2D 250 2E 12.5 x 13.5 12.5 x 16.0 16 x 16.5 18 x 16.5 18 x 21.5 20 x 21.5 65 105 180 230 280 340 400 2G 12.5 x 16.0 16 x 16.5 18 x 21.5 20 x 21.5 50 85 130 160 450 2W 12.5 x 13.5 12.5 x 16.0 16 x 16.5 18 x 21.5 20 x 21.5 40 50 85 130 160 Code 3.3 4.7 10 22 33 47 68 100 220 330 470 3R3 4R7 100 220 330 470 680 101 221 331 471 12.5 x 13.5 12.5 x 16.0 16 x 16.5 18 x 16.5 18 x 21.5 175 225 385 490 590 12.5 x 13.5 12.5 x 16.0 16 x 16.5 18 x 16.5 20 x 21.5 160 205 285 440 500 12.5 x 13.5 16 x 16.5 18 x 16.5 16 x 21.5 95 260 320 380 12.5 x 13.5 12.5 x 16.0 16 x 16.5 18 x 16.5 18 x 21.5 20 x 21.5 80 105 220 270 330 410 Case size D x L (mm) ". Rated Ripple Size 12.5 x 21 is available for capacitors marked," ". Size 16 x 21.5L is available for capacitors marked," ". Size 20 x 16.5L is available for capacitors marks," In this case, 6 will be put at 12th digit of type numbering system. Rated Ripple (mArms) at 105C 120Hz Frequency coefficient of rated ripple current V 6.3 ~ 100 160 ~ 450 Cap. (F) Frequency 00 ~ 68 0100 ~ 4700 1000 ~ 6800 3.3 ~ 100 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1kHz 1.57 1.34 1.13 1.40 10kHz~ 2.00 1.50 1.15 1.60 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity. CAT.8100V |
Price & Availability of UUJ1E102MNL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |